It is usually best to use the default network port numbers for these services because they are well known by most applications. Applying and Saving Changes The web interface runs locally on the device, which means that the interface always maintains and displays the latest settings in the AnywhereUSB. Wireless Design Services World class design and development. This Multi String value contains a list of devices that the AnywhereUSB will enumerate all other devices will show as “unknown device. The Connectware Manager server allows devices to be configured and managed from remote locations. Hold down the front panel Reset button for about 2 seconds, until the front panel LEDs start blinking an amber color.

Uploader: Nekora
Date Added: 12 June 2006
File Size: 29.77 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 30950
Price: Free* [*Free Regsitration Required]

Specifies the method by which the associated interface connects to the remote server. Gray—In use by other host PC.

Several services have a setting for whether TCP keep-alives will be sent for the network services. It does not close the browser window, but displays a logout window.

anywhereusv/2 This does not mean that the maximum number of hubs in a system is five. AnywhereUSB drivers work equally well on physical servers or virtual machines in virtualized environments.

If discovery fails, ensure that Windows Firewall is Off. Hold down the front panel Reset button for about 2 seconds, until the front panel LEDs start blinking an amber color. Before uploading the firmware or the POST code, it is very important to read the Release Notes supplied with the firmware to check if the POST code must be updated before updating the firmware.


After the connection process completes, the AnywhereUSB Configuration Utility will update its Connection Status information and look similar to the following: Specifies the keep-alive interval to specify for packets received and packets transmitted. Follow the respective instructions below for IP configuration methods of the different models. Enter the desired IP address and click Add.

An advantage of the client-initiated connection is that it can be used on any network, whether the client device has a public or private IP address – as long as the Connectware Manager server is accessible on that network.

Use the power supply provided with the unit.

Anywhereusb 2-port USB Hub Prices | Compare Deals & Buy Online | PriceCheck

After installing the Connectware Manager server, the AnywhereUSB must be configured to properly communicate with the remote server system. Disconnect when Connectware Management is idle Idle Timeout: It also displays memory statistics, CPU utilization, and how long the unit has been running since the last power-on or reboot.

It’s a community-based project which helps to repair anything. The Update Firmware page is displayed. This causes the browser to reload the page. Check the Keep network settings checkbox to keep the current network settings such as the IP address and host key settings.

Digi AnywhereUSB 2 Anywhereusb/2 G2 2-port USB Hub | eBay

Since the connection request is driven by the host PC, the session will automatically get re-established. At the bottom of the page are checkboxes for the SNMP traps that can be used: When using RealPort COM port redirection or RFC these settings are supplied by applications running on the PC or server, and the default values on your Digi device server do not need to be changed.


Reboot the virtual machine. For polarity, see the following diagram: These serial settings may be documented as 8N1, which means that the device is using a baud rate of bits per second, 8 data bits, no parity, and 1 stop bit.

Online Help Online help is available for all anuwhereusb/2 of the web interface, and for common configuration and administration tasks. For more information on how to configure your firewall, refer to your firewall manual.

Digi AnywhereUSB 2 Anywhereusb/2 G2 50001689-01 2-port USB Hub

The utility displays a list of all AnywhereUSB devices on your local subnet and on any subnet configured in the Discovery List. If desired, you can enable password authentication. The value Automatic is less efficient, but it is g in situations where a firewall or proxy may prevent direct connection via TCP. Make sure Windows is configured to show file extensions.


Doing so will damage your AnywhereUSB. In addition, any files that were loaded into the device through the File Management page such as custom-interface files and applet files are retained. Contact a Digi expert and get started today!