When prompted, use the arrow keys to select Yes from the dialog box tocheck the drive. Remove the screws and setthem aside. Connect the chassispower LED cable to this connector. Enable this option only when you install bitoperating system. Secure the PSU to the chassiswith the four screws you removedearlier. Make sure that the power cables areconnected to a grounded power outlet.

Uploader: Arasida
Date Added: 18 January 2008
File Size: 58.83 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 62992
Price: Free* [*Free Regsitration Required]

Motherboard information for detailed information on themotherboard. Align the screw holes.

Top-performance Pedestal UP Server with 45nm Processor Ready

Information to prevent injury to yourself when trying aus a task. When prompted, press to continue installation. Drive in the thumb screw to securethe HDD blower case.

To create an Asuus volume: Press to move the cursor to OK, then press. When set to Power On, the system goes on after an AC power loss. Page 7 ContentsChapter 7: Do not forget to connect the fan cables to the fan connectors.


TSE5/PA4 Manual | Servers & Workstations | ASUS Global

Press to overwrite any data and create the new IM array. Insert the LSI driver diskette into the A: Refer to the corresponding sections for details on these utilities. Refer to the table for thedefault SAS cable connections. Selectan item then press to display the configuration options. Ts300-e the previous steps to secure the other inner rail to the bottom of thechassis with screws. Select ts300e-5 using the key when asked to select the driver disk source.

When disconnecting a cable,hold and firmly pull the cableplug. Page 64 To remove the power supply unit PSU: Remove the screw that secures themetal bracket to the chassis. When you buy a boxed Intel Ts30-e5, the package includes the cooler, fan, retentionbrackets, screws, thermal grease, installation manual, and other items that arenecessary for CPU installation. Insufficient airflow inside the system may damage the motherboard components. The drivetray ejects slightly after you pull outthe lever.

Do not forget to connect theCPU fan connector! Find the proper orientationand push down firmly until the connectors completely fit. Open the bezel toaccess the front panel components. Select Check Consistency from the pop-up menu, then press. Follow screen instructions to continue the OS installation.


The bottom one is LAN1. Check if the power cable is properlyconnected to the power connector in thesystem rear panel.

Reboot the system from the hard disk drive. The contents of the support CD are subject to change at any time withoutnotice.

Download Asus TSE5 motherboard BIOS – P5BPE4L • Wim’s BIOS

Select the RAID controller driver from the list, then press. Secure the drive with a screw. If you have configured a hot spare, it will also auss listed.