The print server will append the last six digits to the name you specify. This indicates that the print server hardware is properly configured. When done, save the new config. This option allows you to view polling time from the print server. Select the NetWare File Server to which the print server device will be attached.

Uploader: Mojind
Date Added: 12 February 2008
File Size: 65.49 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 29514
Price: Free* [*Free Regsitration Required]

Double click the Network icon. When you select setup menu of web configuration from the print server, it then as shown in the following picture. In the Add Port dialog box, select Other, as shown encre the following picture.

Click Start on the bottom left hand corner of the screen.

In this option, type a name for identification purpose or just leave it in default recommended. In some cases, if necessary, delete the print server, print queue s or other setting s. You should be use web browser to view and management the print server. The program can be run from any Windows-based PC. In some cases, if necessary, delete the print server, print queue s or other setting s.

Point to Settings, and select Control Panel. This option allows you to input contact name of the print server. Run the PSAdmin and upgrade the print server again.


The upgrade filename is mps We delete comments that violate our policywhich we encourage you to read.

This option allows you to view printer type from the print server. Turn off the power for each printer. Power Orange When this light is on, the print server unit is properly connected to the power adapter. Click Start, point to Settings, and select Printers. Operation of this equipment in a residential area is likely to cause harmful interference in which the user will be required to correct the interference at their own expense. Possible Explanation A same print server name or queue names exists in the specific NetWare file server as the one you specified in the Auto Setup dialogue box.

Select Microsoft from the Manufacturers list. Multi-Segment Frame Type This LED, however, may flicker whenever the data are being transmitted and printed.

When you start the print server, it will compute the print server from start time to power off time. Refer to Chapter 7 for the detailed instructions to complete the installation.

CD-R KING ENPS Free Driver Download (Official) () – enpszip

Once this option is enabled, the following IP address, Subnet Mask, Gateway will be grayed out and are not available for editing. Page This troubleshooting guide will also apply to a multiple-segmented network while installing the print server For example, assuming the print server is on Segment A, NT server is on Segment B, and there is a gateway computer between Segment A and Segment B.


Select Connect to dncore printer on the Internet or on your intranet option, appear as follow picture. The firmware version of the print server.

Select one printer server port from the list, which is now connected to one of your printer sas shown in the following picture. Select Settings and select Printers. If you are using a PostScript printer you can select the LaserWriter 8 icon. Under the prompt sign, type smit and press Enter.

Encore ENPS-2012 – print server

This LED, however, may flicker whenever the data are being transmitted and printed. If these printer drivers are not available to you, please contact your printer manufacturer. Table of Contents Add to my manuals Add. The un-installation wizard program will be launched.